If your key fob has been lost, failed or is just looking worn out and the XK8 part needs to be replaced then there is a procedure to be followed to programme the key fob for your XK8 / XKR car. A typical Jaguar Dealership will charge you for the programming procedure, possibly up to half an hour of time. However, the procedure is fairly straightforward as follows:

Pull the headlamp flasher stalk towards you and at the same time, turn the ignition key to position one. Then release the stalk and flash the lamps five times. Press any button on the fob and then turn off the ignition and the fob should be programmed. After five flashes, you should hear a noise from the security sounder and then also a bleep after you press each key on the fob.

You may also be interested in our XK8 / XKR Parts Review on the windows reset procedure - Click Here

Click Here to contact Dave Roche @ XK8 Parts if you need a replacement Key Fob or require any further details.

Jaguar XK8 and XKR Parts

One Response to “XK8 Parts Review – Key Fob Availability and Programming”

Leave a Reply

You must be logged in to post a comment.