Both the ZF (XK8) and the Mercedes (XKR) automatic gearboxes are supposed to be 'sealed for life' units with no need to service the gearbox. These gearboxes are no exception to the fact that the oil and therefore the filters will become contaminated with mileage and to preserve the life of the unit, they will benefit from an oil change at 50,000 and thereafter 30,000 mile intervals. In the past, servicing the autobox was prohibitive due to the cost of the special oil / filter required for the job. A gearbox service will also ensure ongoing smooth gear engagement.

Now at XK8 and XKR Parts we can offer complete service kits covering the whole model range including; XK8 (ZF5HP24). XKR (Mercedes 722-600) and late XK8 / New XK (ZF6hp26 - 6 speed auto boxes.  Our service kits also include the correct Jaguar specification gearbox oil with the right quantity so no need to buy more than you need.

XK8 (ZF5HP24) Gearbox (Also Suitable for Audi, BMW and Land Rover Vehicles) CLICK HERE for Make / Model Application List

ZF5HP24 XK8 and XJ8 Automatic Gearbox Filter Kit

Kit includes:

Filter, Sump Gasket and Correct LT71141 Mobil Oil (6 litres only required) and Filling Instructions.

Special offer Price - £99.75

Excluding Shipping and VAT.

XKR (Mercedes 722-600) Gearbox

Mercedes 722 600 Autobox Filter, Gasket and Oil

Kit includes:

Filter, Sump Gasket, Correct Titan ATF 4134 Oil (6 litres only required) and Filling Instructions.

Special offer Price - £99.75

Excluding Shipping and VAT.

Late XK8 / XKR / New XK / S Type / X350, XF (ZF6hp26-6 speed) Gearbox. (Also Suitable for Audi, BMW, Land Rover, Range Rover, Ford, Maserati, Kia and Hyundai Vehicles) CLICK HERE for Make / Model Application List

Jaguar Parts ZF6HP26 Filter Gasket and Oil Kit

Kit includes:

Complete Sump / Filter / Gasket Unit, Modified Case Connector, 21 Torx Headed Replacement Bolts, Correct Shell ATF M1375.4 Oil (6 litres only required) and Filling Instructions.

Special offer Price - £148.95

Excluding Shipping and VAT.

Please CONTACT DAVE if you would like to to purchase the complete filter kits or just the filter or special oil components of the kit.

WORLDWIDE MAIL ORDER AVAILABLE AND IF OUTSIDE THE UK AND EEC COUNTRIES THEN NO UK VAT TAX TO PAY !

HURRY WHILE STOCKS LAST AND PRICE OF KIT COMPONENTS GOES UP !

Jaguar XK8 and XKR Parts

Let’s face it, the front of a Jaguar XK8 / XKR looks pretty impressive in it’s standard format. But a problem with the standard number plate plinth is that it partly obstructs the grill aperture. The front of the car looks much better if the number plate is positioned below the grill. This is a great improvement to the existing looks and is definitely recommended if you are planning to fit a mesh grill to the car which will really improve the look of your car further. See our section on XK8 and XKR Mesh Grills.

We can supply two different types of kit fitting the XK8 and XKR Models up t0 2003 - also post 2003 as well - please enquire:

Type 1 - Number Plate Plinth Kit With Bracket Fixings and Instructions

XK8 and XKR Parts Lowered Number Plate Plinth Kit

Our Price - £30 Plus Shipping and VAT. Note no UK VAT @ 20% may be payable if you live outside of the UK and EEC Countries.

Type 2 - Number Plate Plinth Kit One Piece Blending to the Nose Curvature

Jaguar XK8 XKR Front Number Plate Plinth One Piece Blending to Nose Curvature

Key Features:

* Supplied in black, easy to paint to body colour.

* Manufactured from 3mm ABS plastic, Ski Slope style blends into nose curvature.

* Box section design prevents number plate "kerb / speed bump" snagging which occurs with bracket style fitings, which can crack the nose cone.

Our Price - £55 Plus Shipping and VAT. Note no UK VAT @ 20% may be payable if you live outside of the UK and EEC Countries.

Either of these kits will really enhance the look of your Jaguar XK8 and XKR showing off the grill aperture to it’s best. Plinths can also be painted to match the colour of your car for a small additional fee.

Contact Dave to Enquire Further or to Order - CLICK HERE

Thanks for Visiting !

Jaguar XK8 and XKR Exterior Body Stying Accessories

Jaguar XK8 and XKR Upper Wishbone Arm Refurbished

A common problem is with the Jaguar XK8 and XKR's upper wishbone arm bushes seizing to the fulcrum pin and the whole lot rotating round and wearing into the subframe, or if no rotation in the fulcrum pin then the arm cracking / snapping. These arms from Jaguar are often not available and can be expensive to replace. We can supply qualty refurbished arms both left and right sides. Each arm includes 2 new OEM metallastic bushes and top ball joint, with the arm cleaned and painted so it looks great fitted. This is ready to fit and will save you time and effort in removing and refitting the old corroded in parts. A new arm from Jaguar will cost around £348 + VAT for left side MJD1421AA and same price for the right side MJD1420AA. (Supercession numbers JLM21377 and JLM21378) We can supply the refurbished arms for £220 + VAT and shipping each. This price includes a repayable surcharge of £60 + VAT on receipt of your old arm and if OK for refurbishing. So the net cost is just £160 + VAT.

Jaguar XK8 XKR Upper Spring Mounting Plate MJA2170BD

These upper mounting plates are notorious for wear in the cushioning material and in some cases this reduces down to cause metal to metal contact. This will cause a lowering of the ride height and knocking from the front suspension. Our price for the genuine Jaguar only available part - MJA2170BD is £116.25 + shipping and VAT each.

NEAR SIDE (LEFT) REAR LOWER CONTROL WISHBONE ARM JLM21305

If you have play in the bush or ball joint of the XK8 / XKR 100 series lower rear wishbone arm, then removing and refitting them is quite a challenge and requires a special jig and press to complete the job. Why not save time and money with these refurbished lower arms for the XK and XKR complete with new OE ball joint + bush, cleaned and painted they look great and are ready to fit. A new arm from Jaguar will cost around £348.75 + VAT for left side JLM21305 and same price for right side JLM21304. We can supply for £190 + shipping and VAT. This price includes a repayable surcharge of £50 on receipt of your old arm and if OK for refurbishing. So the net cost is just £140 + VAT.

Jaguar XK8 XKR Front Suspension Bush Kit Including Shock Absorber Bushes

Jaguar Specification Metallastic (Rubber) Bush Kit - this is a Jaguar Specification Quality Aftermarket Bush Kit. Kit includes: Front Upper Wishbone Bush x 4, Front Lower Wishbone Front Bush x 2, Front Lower Wishbone Rear Bush x 2, Front Anti Roll Bar Bush x 2, Lower Shock Absorber Bush x 2. Price £175.00 + shipping and VAT. Note Equivalent Price from Jaguar is £345.00 + shipping and VAT. All parts are available to purchase individually if required. Note the shock absorber bush is now available separately. Previously you needed to replace the shock absorber if the bush had failed !!

Jaguar XK8 and XKR Front Suspension Polybush Kit

Polybush Polyurethane Bush Kits - these are the Classic original polyurethane bushes, giving a firmer ride and more positive handling. Kit includes Front Upper Wishbone Bush x 4, Front Lower Wishbone Front Bush x 2, Front Lower Wishbone Rear Bush x 2, Front Anti Roll Bar Mount x 2, Front Anti Roll Bar Link x 2, Lower Bush x 2. Price £245.38 ex shipping and VAT.

XK8 Parts Front Suspension Ball Joint Kit

This is a money saving quality OEM parts kit consisting of the two top ball joints fitted into the upper wishbone arm - JLM21380 for the XK8 / XKR / XJ8 and also the two bottom ball joints for the lower / rear wishbone / control arm - MNC1350AA for the XK8 / XKR / XJ8. Price from Jaguar £140.65 + Shipping and VAT. Our Price of just £74.65 + shipping and VAT. All parts are available to purchase individually if required.

To enquire about any of the above items then CLICK HERE to contact Dave Roche Now.

WE NOW DO A HUGE RANGE OF NEW AND RECONDITIONED JAGUAR XK8 AND XKR PARTS AT COMPETITIVE PRICES

Thanks for Viewing !

Jaguar XK8 and XKR Parts

Grab a Bargain Now !

JAGUAR XK8 XKR NEW CENTRE CONSOLE LID WITH CUP HOLDER

Many XK8 and R's don't have a centre console lid with retracting cupholders in them. Also the leather on the drivers side can show signs of ageing. Why not replace yours with a new recovered brand new unit in the colour of your choice and with the 2 cupholders. Leather recovering lead time is 2 weeks from order. Typical price of a new unit from Jaguar is over £260 (often not available) and just the cupholder mechanisms are over £138 each.
Special offer Price - £175 each + Shipping. When ordering please let us have your trim code.

GENUINE JAGUAR NEW XK8 XKR & S-TYPE REAR ENGINE MOUNT XR853854

If you need to replace the rear engine mounting on your XK8 / R then these will cost £92 from Jaguar each. Our Special Offer Price is just £34.75 each + Shipping .

JAGUAR XKR LIMITED EDITION SILVERSTONE SILL INSERTS

JAGUAR XK8 SILVERSTONE LIMITED EDITION SILL INSERTS

These are the hard to find chrome sill inserts for the Silverstone limited edition (100 cars). Both XK8 and XKR inserts are available. Special Price of £14.75 each + shipping.

REAR SHOCK ABSORBER XK8 R-PERFORMANCE ADAPTIVE SUSPENSION

These brand new Genuine Jaguar adaptive (electronic) suspension dampers Part Number MXD3540AB Rear Shock Absorbers are typically over £288 each from Jaguar. We have a very limited stock of these Genuine Jaguar parts. Our price just £140 each + shipping

JAGUAR NEW XK150 PRE LAUNCH INTRODUCTION MANUAL

I am not aware of any book or technical manual relating to the New XK (150) Range Launched in December 2005. Supplied to only Jaguar Dealerships on launch to provide a comprehensive technical summary, this is a complete overview of the car. With 67 sections in total and 233 pages this has to be a must for the XK150 owner / enthusiast. This covers every aspect of the car from the front suspension right through to the seat belt system. Packed with exploded diagrams and technical details, this manual will be a great reference guide and the improved knowledge of the workings of the car will help you save money in the future. Get a copy now while you can - Limited Stocks !!. Special Price of just £35 + Shipping.

XKR Front Shock Absorber Assembly With Adaptive Control Damping 2003 to 2005

These brand new Genuine Jaguar Front suspension dampers Part Number MXD2140AB for Jaguar XK8 / R;s 2003 to 2005 are over £288 each from Jaguar. We have just 2 remaining of these Genuine Jaguar parts. Our price just £140 each + shipping- NOW SOLD OUT !!

XK8 XKR New Key Fob - LJE2610BB and LJE2610BC

We have a limited stock of these genuine Jaguar remote key fobs for XK8 / XKR's from Vin A11051 and XJ from Vin F20645. Price from Jaguar £60. Our price just £45 each + shipping. Programming instructions provided at no additional cost. Not supplied with batteries

All our £ prices include UK Sales Tax (VAT). No sales tax to pay if living outside of the EEC countries.

To enquire about any of the above items then CLICK HERE to contact Dave Roche Now.

WE NOW DO A HUGE RANGE OF NEW AND RECONDITIONED JAGUAR XK8 AND XKR PARTS AT COMPETITIVE PRICES

Jaguar XK8 and XKR Parts

Eaton M112 Upgraded Supercharger Coupling

XKR XJR Eaton M112 Supercharger Upgraded Coupling

If your XKR / XJR is making a knocking sound then the likelihood is that this is down to the coupling in the supercharger unit. Our uprated coupling is a solid polymer item, while the standard ones are a sprung metal connector. Good idea to change this at the same time as changing the oil as part of a service job. Price is £24.75 + shipping and VAT.

XKR XJR Supercharger Great Value Oil Change Kit

XKR XJR Eaton M112 Supercharger Oil Change Kit

We can supply supercharger oil change kits for the Eaton M112 Supercharger. The kit includes 225 ml of oil, syringe / tube and filling instructions. Cost of oil through Jaguar is approximately £60 plus typical Jaguar labour charge of £80 = £140. With this kit you can do yourself for a fraction of the cost. We use British Petroleum synthetic aviation turbine oil which exceeds the original Eaton requirement. Price is £24.75 + shipping and VAT.

Upper pulley for XKR, XJR, Range Rover Sport

JAGUAR XJR XKR S TYPE R RANGE ROVER SPORT SUPERCHARGER TOP PULLEY UPGRADE IN STAINLESS STEEL

We are able to offer upgraded supercharger pulleys to fit Jaguar and Range Rover AJV8 supercharged cars. These items are CNC machined from the highest quality materials, produced to exacting standards, and available at competitive prices for our customers. Upper pulleys have been produced to give a 10% supercharger speed increase, equating to
approximately 2.5psi boost rise, on 4.0 and 4.2 engines. For power increases, realistically, the upper will give 30-35bhp midrange and will give perhaps 15bhp peak increase at high rpm, due to the Eaton M112’s reduced efficiency at higher rpm. Either upper and lower pulley's produces a significant power improvement and very noticeable
increase in instant acceleration.

Our upper pulleys are made in stainless steel, turned to give a very smooth and aesthetically pleasing finish, and produced with a consistent .0002” /
0.005mm inner bore tolerance to ensure consistent and reliable shaft fitment. Unlike some aluminium versions of this upgrade, belt slippage is not a problem with these steel pulleys.

Fitment does require some material removal from the supercharger snout casting. This is achieved relatively simply with a rotary file or other hand tools. Overall the pulley change should take about 3 hours on XKR and early XJR models, but on S-Type and X350 models access in situ is difficult and some people prefer to remove the supercharger.

Price is £135.00 + shipping and VAT

Lower pulley kit for XKR, XJR, Range Rover Sport

JAGUAR XJR XKR S TYPE R LOWER PULLEY UPGRADE

Lower pulleys have been produced to give a 16% power boost on 4.0 engines and 8% on 4.2 engines (which already have a larger lower wheel as standard). Realistically, the lower will give a 40-45bhp increase, and will give perhaps 15bhp peak increase at high rpm, due to the Eaton M112’s reduced efficiency at higher rpm. Either upper and lower pulley produces a significant improvement and very noticeable increase in instant acceleration.

Kit includes a modified Jaguar lower crank pulley, fitted with an aluminium lower supercharger pulley, replacement supercharger drive belt, replacement original Jaguar pulley bolt, and instructions.

Price is £335.00 + shipping and VAT

There is a £95 surcharge refunded on receipt of your old crank lower pulley.

Lower Pulley Only

For customers with machining facilities to carry out modification to the crankshaft damper pulley in-house and who wish to source drive belts separately, we can supply lower pulleys on a pulley-only basis. Price is £148.00 + shipping and VAT

Jaguar XKR/X300 XJR Intercooler Radiators - Direct bolt-in replacement for the standard pre-cooler radiator.

JAGUAR XKR UPRATED PERFORMANCE SUPERCHARGER INTERCOOLER RADIATOR

Unfortunately, Jaguar didn't design much reserve into the intercooler circuit. If coolant and inlet air temperatures rise too much, the ECU detects the changes and retards ignition accordingly to protect the engine – this will even happen on a standard car in hot conditions, though it is rarely noticeable to the driver.

Unless intended for track or very hard road use, the cooling system can cope comfortably with a single pulley upgrade. Driven hard however, standard and single pulley upgraded engines will benefit from cooler inlet air temperatures, and that means more power. Engines with both pulleys upgraded don't just benefit from uprated intercooling –they need it. We have invested in the manufacture of drop-in replacement intercooler radiators to fit the XKR and offer them at far more affordable prices than the £650-£800 typical from other sellers.

Price is £455.00 + shipping and VAT

We can also supply:

Uprated intercooler water pump which is a direct plug-in replacement for the standard intercooler water pump.

Price is £175.00 + shipping and VAT

Coming Soon:

Eaton M112 supercharger rebuild kits (bearings & seals)

Supercharger pulleys for the 5.0 cars

Contact Dave Roche to discuss further or order - CLICK HERE

Jaguar XK8 and XKR Parts